We developed the CORiTEC 650i and CORiTEC 650iLoader machine systems for the area of PREMIUM machines and PREMIUM requirements. The CORiTEC 650i Loader includes a fully integrated automatic 16-fold blank changer. This enables you to operate the machine system at full capacity around the clock without supervision, while maintaining consistent high precision.
Each restoration is fabricated with optimum precision and flexibility to open up almost free choices of materials and indications. Whether wet or dry machining, block or blank form, the CORiTEC 650i series impresses in all areas.
Closed blank holder for high stability
Processing of all common materials in blank shape
C-Clamp holder
Each restoration is fabricated with optimum precision and flexibility to open up almost free choices of materials and indications. Whether wet or dry machining, block or blank form, the CORiTEC 650i series impresses in all areas.
Half-open blank holder
Enables 5-axis machining up to 90 degrees axis adjustment
Complex end face machining possible
Glass ceramics adapter
6-fold glass ceramics adapter
Each restoration is fabricated with optimum precision and flexibility to open up almost free choices of materials and indications. Whether wet or dry machining, block or blank form, the CORiTEC 650i series impresses in all areas.
Processing of up to 6 blocks at once possible
Processing of all common materials (e.g., glass ceramics & lithium disilicate)
NT pre-milled starterkit
6-fold pre-milled abutment holder
Each restoration is fabricated with optimum precision and flexibility to open up almost free choices of materials and indications. Whether wet or dry machining, block or blank form, the CORiTEC 650iseries impresses in all areas.
Processing of up to 6 pre-milled abutments at once possible
High accuracy of fit due to predefined implant interfaces
Different kinds of abutment systems available (e.g., nt-trading, DESS, Medentika or Zfx)
Blank holder for Hybrid machining
Each restoration is fabricated with optimum precision and flexibility to open up almost free choices of materials and indications. Whether wet or dry machining, block or blank form, the CORiTEC 650i series impresses in all areas.
iCAM V5 is the high-end CAM solution from imes-icore®. The software enables high-precision milling data calculation in simultaneous 5-axis machining for best surface quality and fitting accuracy. Especially with hard materials such as glass ceramics, cobalt chrome or titanium, high-resolution milling data are decisive for best fitting accuracy. In addition, the tool life is increased by smooth running of the machine during machining. Thanks to predefined milling strategies developed by imes-icore® for all materials and applications, the iCAM V5 provides you with a valuable CAM solution that increases the productivity of the CAD/CAM system.
imes-icore offers a whole package including scanner, exocad CAD, iCAM CAM software, milling and grinding tools and CORiTEC milling machines.
The integrated workflow for both wet and dry milling processes in combination with the highest level of stability offers process-reliable results for the highest demands.
A perfect solution for remarkable results through a wide range of applications.
The CORiTEC 650i series is compatible with scanners, exocad and impresses with its wide range of additional accessoires such as CAM software, sintering furnaces and extraction systems.
LPBF Hybrid processing: With the high-precision CORiTEC 650i machine, technology partners have developed a special process to re-mill work that was previously produced in the LPBF process with high precision. This allows e.g. building of highly complex web constructions made of various materials such as titanium or CoCr in advance in the LPBF process, and subsequently rework interfaces with the CORiTEC 650i for the perfect fit and surface finish. This procedure is implemented in a special WorkFlow, in which a 3D probe is integrated in the CORiTEC 650i.
The touch probe determines the exact position and position of the LPBF building board. Using 3D measurement functions of the CAM software, the fit and interface areas of the restorations on the LPBF plate can then be precisely milled with the CORiTEC 650i. This method can be used in principle with any LPBF systems and with different CAM systems in combination with the CORiTEC 650i.
With the 3D probe, a controlled measurement is made via reference points in order to determine deviations, displacements and rotations. In the background, the imes-icore 3D measurement software calculates the values and writes them back to the CAM software to implement the corrections.
CORiTEC iVAC eco+
Accessories
suction systems
iVAC eco+: The iVAC eco+ is the universal solution for all table machines made by imes-icore. Technical Highlights: Very powerful, with a flow rate of up to 260m³/hr, adjustable power, brushless motor for a long service life; large-volume fi lter with 25 liter filter bags and a downline HEPA filter, runs quietly, suitable for imes-icore machine tables T1 and T2.
Volume flow
260m³/hr
Output
1200 W
Filter system
dust drawer, HEPA filter
Filter volume
25 liters
W x D x H (mm/inch)
440 x 460 x 750/ 17.3 x 18.1 x 29.5
Supply voltage
115 V - 230 V
CORiTEC iVAC PRO+
Accessories
Extraction Systems
iVAC PRO+: The industrial extraction system with brushless motor, volume flow of 280 m³/hr, adjustable capacity, filter system with Teflon filter cartridge andlarge dust drawer, automatic compressed air self-cleaning is suitable for all dental milling machines from imes-icore.
Number of axes and movement type 5 axes, simultaneous machining
Rotation angle A-axis 360° B-axis 130°
Connecting requirements
Weight CORiTEC 650i: 700 kg / 1543.3 lbs CORiTEC 650i Loader: 930 kg / 2050.65 Ibs
Width x depth x height CORiTEC 650i: 785 x 1100 x 1940 mm / 30.9 x 43.3 x 76.4 inch CORiTEC 650i Loader: 1324 x 1100 x 1940 mm / 52.1 x 43.3 x 76.4 inch
Mains voltage / frequency / power 400 V - 3 stages / 50/60 Hz / 3.2 KW
